Best coriolis flow meters factory
Coriolis meters manufacturer from China: Useful for Gases and Liquids: Mass flow meters can be used for both gases and liquids. They are commonly used in applications where precise control over mass flow is necessary, such as chemical processing, gas distribution, and HVAC systems. Because mass flow meters measure mass directly, they are less affected by temperature and pressure variations. They are frequently used when the fluid’s temperature and pressure are subject to significant fluctuations. Read additional info on coriolis mass flow.
Vortex flow meter is the fluid Reynolds number is within a certain range, and its output is only proportional to the volume flow. The output of vortex flowmeter has frequency signal and analog signal, and the analog output is obtained by f/ conversion on the basis of frequency output. This conversion loses about 0.1% accuracy. Therefore, when it is used to measure the steam flow, users prefer to use the frequency output. There are several other reasons why frequency output vortex flowmeters are more popular with users such as thermal companies.
After-sales service of gas turbine flowmeter: The use effect of gas turbine flowmeter largely depends on whether it is used reasonably. For new users, it is the supplier’s responsibility to provide technical guidance before the user installs. As for the products of international brands, they have occupied the market of major Chinese users for many years, and these major users have sufficient technical strength. For their scattered users, they basically rely on middlemen to do it. Problems brought about by after-sales service appear.
Fork density meter can measure the density, concentration, gravity, temperature, and accuracy of liquids without being affected by temperature, pressure, density, and viscosity. Applications of micro motion fork density meter: Pipeline interface inspection, slurry solids monitoring and corrosive acid concentration control; density and concentration monitoring that require rapid response. Continuously measure pipelines in real-time through pipelines and storage tanks to increase installation flexibility and choose from a variety of corrosion-resistant materials to measure the density and concentration of key chemicals. Supports protocols connected to DCS, PLC and flow computers. Pass Hazardous Area Approved Head-Mounted Transmitters extend the range of use, the transmitter supports local configuration and display. See additional information on https://www.bjssae.com/.
Beijing Sincerity has developed over years to manufacture the Coriolis Mass Flow Meters industries. Through continuous research, development and transformation, we have become the leader of the Coriolis Mass Flow Meters industries in China. The Coriolis measuring principle is used in a wide range of different branches of industry, such as the life sciences, chemicals, petrochemicals, oil and gas, food, and – no less importantly – in custody transfer applications. Coriolis flowmeters can measure virtually all fluids: cleaning agents, solvents, fuels, crude oil, vegetable oils, animal fats, latex, silicon oils, alcohol, fruit solutions, toothpaste, vinegar, ketchup, mayonnaise, gases or liquefied gases.
The vortex flow meter is more commonly used in steam flowmeters now, with temperature and pressure compensation, and the measured result is mass flow. However, due to different environments, steam is divided into superheated steam and saturated steam. These are all possible changes in the density of steam, which will affect the measurement results. After the above-mentioned evaporation occurs, the former one has no effect on the compensation, only the dry part of the steam increases, and the dryness increases accordingly. The latter situation means that the saturated steam becomes superheated steam. At this time, the influence on the flow meter is divided into three types.
Day for day vast quantities of oil and gas are transported across the globe, refined and transported further. Mature and foolproof technology is essential. But it is the control through instrumentation and visualisation that help make all these processes safe and reliable. The Coriolis Insertion Density Meters could be used for the detection of the liquid’s density. The insertion density meters are the best choices for the proccess control as the basic parameters of density, and also for the quality control with the solid percentage or the concentration for references.
