Martindale abrasion tester factory with gesterinstruments.com
Tensile testing machine manufacturer from China? Mask Testing Machine Synthetic Blood Penetration Tester, Bacterial Filtration Efficiency Test Equipment, Particulate Filtration Efficiency Tester, Masks Leakage Tester In stock, fast delivery, Consult us now! Mask testing equipment produced by GESTER is very popular in the market.Protective Clothing Tester and Mask Tester, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.Adhering to the service concept to be customer-oriented and service-oriented, GESTER is ready to provide our clients with quality products and professional services. Read even more info on textile testing machines.
With several modes of operation (spray, alternating light and dark, revolution), can simulate the real climate state. Individual timing of each sample clamp may enable different sample test in a same tester and facilitate test monitor and reduce operation cost. 7-inch color touch screen, various test monitor models(animation, figure and chart), simply operate, directly and clear. 1000 hours of continuous operations. Industrial grade microcontroller with strong antijamming capability. Xenon arc light fastness tester: 12 working positions monitoring, can set and inquire the irradiation energy. Possess fault prompt functions and self-diagnostic function.
Correct use of computerized universal testing machine: When opening the clamp to take the sample, pay attention to the clamping distance of the sample, not too much or too little. When the tensile testing machine and the microcomputer are connected, the operation must be carried out according to the program requirements. It is strictly forbidden to operate the program due to illegal operation; The parameters to be printed check whether the printer has paper and replenish it in time before printing. After the operation is completed, shut down the tensile testing machine for rubber according to the program requirements. It is strictly forbidden to cut off the power directly.
The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.
Reagent Preparation: Prepare corresponding reagents according to different test standards and keep them as standby. If sodium perborate is required in the test, the preheating temperature shall not exceed 60℃ when preparing the solution, and it shall be used within 30 minutes at most to prevent the loss of oxidant. Solution Warm-up: Put the specified volume of solution and a specified number of steel balls into the stainless steel cup, put the stainless steel cup into the launderometer for a few minutes, preheat to the specified temperature. Then put in the prepared sample for test. Find even more info at https://www.gesterinstruments.com/.
ASTM D4060 tests abrasion resistance of organic coatings by the Taber abraser. This type of test method was introduced around the 1930s to perform accelerated wear testing. Its simplicity and effectiveness helped to make the device broadly adopted for a multitude of test protocols and specifications on a wide variety of products around the world. If you have any questions about the Taber Abrasion, contact us. Gester instruments offers Taber abraser testing to ASTM D4060 as part of the Surface Coatings testing services.
